|
The difference compared with other swing-arm lines is the
device for the automatic setting of the cutting power "multiforce" and
the low friction arm movement "lightswing".
The multiforce device eliminates the need to set the
cutting power; by eliminating an operation the operator can keep the maximum
concentration to choose the best positions to cut saving thus material. Moreover
the precise control over the penetration of the die in the cutting pad can
reduce its consumption up to 50%.
The lightswing system dramatically reduces the effort
needed to move the arm, therefore reducing operator's fatigue.
| |
cutting table mm.
|
Arm width mm.
|
Maximum cutting power
ton. / kN |
Maximum stroke
mm. |
Maximum dayligh without cutting pad
mm. |
Motor power
HP / kW |
Size
mm. |
Net weight with oil
Kg. |
Weight with sea packaging
Kg. |
|
MF 20 C |
900x430 |
370 |
20 / 196 |
90 |
125 |
1 / 0,75 |
900x1000x1710 |
660 |
775 |
|
MF 9.1 |
900x450 |
370 |
22 / 216 |
90 |
125 |
1 / 0,75 |
900x1090x1710 |
910 |
1030 |
| MF 9.3 |
1000x500 |
370 |
25 / 245 |
90 |
125 |
1 / 0,75 |
1000x1140x1710 |
1020 |
1150 |
| MF 9.4 |
1000x500 |
500 |
25 / 245 |
90 |
125 |
1 / 0,75 |
1000x1160x1710 |
1060 |
1190 |
| MF 9.5 |
1000x500 |
610 |
25 / 245 |
90 |
125 |
1 / 0,75 |
1000x1160x1710 |
1080 |
1210 |
| MF 9.6 |
1200x500 |
610 |
22 / 216 |
90 |
125 |
1 / 0,75 |
1200x1160x1710 |
1100 |
1230 |
|
MF 9.1 A |
900x450 |
370 |
18 / 177 |
90 |
125 |
1 / 0,75 |
900x1030x1710 |
880 |
1015 |
| MF 9.4 A |
1000x500 |
500 |
18 / 177 |
90 |
125 |
1 / 0,75 |
1000x1050x1710 |
950 |
1085 |
Models with the "A" code mount a swing arm realised in light
alloy.
All the machines of the multiforce/lightswing line can
be produced with or without the "CE" marking.
|